ccna 5g

ccna 5g.The order in which you configure the feature categories on the router is also very important. IOS IPS lists in the configuration the commands for processing the categoriesin the order in which they are processed. Some features belong to more than one category. If multiple categories are configured and a feature belongs to more than one category, IOSIPS uses the last configured category as the attribute of the feature, for example, recede, non-recede, or behavior.d.Enable the IPS rule on the desired interface and specify the direction. Use the ipips rule-name [in|out] interface configuration command to apply the IPS rule. The keyword in means that the IPS inspects only the traffic coming to the interface. The keyword out means that the IPS inspects only traffic going out of the interface.5.3.1.5 Loading IOSIPS Feature Packets in RAM Step 5 Load IOS IPS feature packets to the router. For administrators, the final step is to upload the feature packet to the router. The most common method is to use FTP or TFTP. in order to copy the feature package downloaded from the FTP server to the router, you must make sure to use the parameter idconfo at the end of the command This parameter tells the router that an IDConf configuration file is being copied.copy ftp://ftp_user:password(^Server_IP_address/signature_package idconf To verify that the feature package is compiled correctly, the administrator can use the showip ipssignature count command.5.3.2 Configuring CiscoIOSIPS Using Cisco Configuration Expert5.3.2.1 Implementing IOSIPS Using Cisco Configuration ExpertCisco Configuration Expert provides controls for enabling CiscoIOSIPS on an interface, as well as importing and editing feature files from cisco.com, andYou can configure what behavior CiscoIOSIPS takes when a threat is detected. Tasks for managing routers and security devices are displayed on the Cisco Configuration Expert