ccna 200 301 bookshelf minecraft mod

ccna 200 301 bookshelf minecraft mod.How many subnets are there? Because there is only 1 1 (10000000) in 128, the answer is 2] = 2 subnets. How many host addresses are there in each subnet? There are 7 host bits (10000000), so the answer is 27-2=126 hosts. What are the valid subnets? 256 - 128 = 128, which is the size of the address block. Remember we have to count from 0, so the answer is. and 128.What is the broadcast address of each subnet? The value of the next subnet minus 1 is actually the value obtained by setting all host bits to 1. This value is the broadcast address. The next subnet of subnet 0 is 128, so the broadcast address of subnet 0 is 127.. Is there a maiden with a dragon? These are the values that lie between the subnet address and the broadcast address. The easiest way to find out the host address is to write out the subnet address and the broadcast address. This way, the valid hosts can be seen at a glance. The following table summarizes the range of valid host addresses in subnet 0 and subnet 128, as well as the broadcast addresses of the two subnets.Subnet 0 128First host address 1 129Last host address 126 254Broadcast address 127 255Before moving on to the next case. look at Figure 6.1. it is easy to see that you can divide 2 subnets by using a mask of /25 on a Class C address. But so what does it matter what does it matter? Indeed, it doesn't matter at all, because the question is not asked correctly. The real question you should be asking is: what can you do with this information!I think for everyone, this may not be everyone's favorite recreational activity, but it is important, so add to it. We're going to talk about the history of subnetting next. To understand subnetting, you need to understand why this technology is used. I'll start by explaining the process of building a physical network - first adding a router. (We are now using an interconnected network, which I sincerely hope you are already aware of! After we add this router, in order for the hosts in our interconnected network to be able to communicate with each other, there must be a logical network addressing mechanism. We can use IPv6, but IPv4 is still very much a streamRouter#show ip route [output cut] C 192.168.10.0 is directly connected to Ethernet 0. C 192.168.10.128 is directly connected to Ethernet 1.