ccna 200 301 syllabus examples of a grammarian's funeral by robert

ccna 200 301 syllabus examples of a grammarian's funeral by robert.33.3.3.3 317GX8000000F 0x006D81 3 123.1.1.1 978The following table shows the number of users of the software.123.1.1.2 1237 0x80000010 0x001ODA 3 Router LinkStates (Area0)NetLink States (Area 0) Link ID ADV Router Age Seq# Checksum 123.1.1.2 123.1.1.2 284 0x80000007 OX008F79Excessive knowledge of topology databases is not required in the CCNA. The reader can look at the topology database on R2 and R3. The topology database is the same for all 3 routers and the topology database is the same for all OSPF routers in the same area. Do not turn off the router and continue with the following experiment.8.2.7 DR and BDR***1. why DR and BDR are selected In the multiple access network shown in Figure 8-2-6, five routers are connected to the same Ethernet. Assume that without DR and BDR, each router has to establish adjacencies with the other routers in order to interactively route. Each router needs to establish adjacencies with the other 4 routers, and the diagram shows the need to establish '(* 1)/2 adjacencies, where = 5, i.e., a total of 10 adjacencies need to be established. If one router leaves, theIf a router leaves, it has to disconnect from all the routers; if a new router joins, it has to create a new adjacency with all the routers. This not only affects the speed of convergence, but also consumes the bandwidth of the network.247 A