ccna 200 301 syllabus plural spelling of crisis

ccna 200 301 syllabus plural spelling of crisis.The IP addresses of the router's serial interfaces are not in the same network segment, resulting in a failure to communicate and a misconfiguration of the IP address of the router's Brevard interface. Therefore, the correct answer is B.15.Solution.Question B Q: When updating the IOS file, the administrator receives the error message "error opening tftp...... (timedout)" prompted in the figure,What is causing the error? From the display in the diagram, you can determine that the reason for the failed IOS update is that the router cannot connect to the TFTP server. Since the TFTPThe server can't even connect, much less know the size of the IOS file and whether the file is correct, and there is no way to gauge whether the router's flash space can accommodate the requirement. Copying files from the TFTP server to the router is not related to the size of the TFTP server space.134 A1 winter fall an empty deaf villa jaundiced around on ____________________________16.Solution: DE Topic Q: What are two reasons why administrators use the CDP protocol? CDP is a layer 2 protocol, so it can detect layer 2 connectivity, theand can also detect IP addresses at Layer 3. If there is a link failure, CDP can be used to detect if there is a layer 2 failure. You can also view the IP addresses of neighboring devices to implement Telnet applications.The ACE question asks: the two routers in the figure are both made by Cisco, and the two routers are connected to each other by serial lines with subnet masks of255.255.255.252,Use the show cdp entry* command on the Manchester router, which displays as shown in the figure, and ask which three statements are correctly described? CDP is a Cisco private layer 2 protocol, but it can discover IP information at layer 3. The neighbor information that can be discovered through CDP is: the name of the device, IP address, port, capability, platform, and Holddowntime on the opposite end. From the display of the showcdpentry * command in the figure, you can see the following information: device name: London; IP address: 10.1.1.2; platform: Cisco 2610; capability: Router; port: S0/1; Holdtime: 123s; the interface on which Manchester receives this CDP information is S0/0. 10.1.1.2 255.255.255.252 belongs to the 10.1.1.0/30 subnet, and there are two IP addresses available on this subnet, 10XPXP 1.1 and 10.1.1.2o Combining the previous narratives, the correct answer is ACE.