ccna 200 301 syllabus uaeh gestion documental

ccna 200 301 syllabus uaeh gestion documental.12.0.0.0/24 is subnetted, 1 subnets C 12.1.1.0is directlyconnected, Seriall/0 S 192.168.1.0/24 [1/0] via 12.1.1.1You can see from the above output that shutting down the S1/1 interface of the router loses the directly connected route to that interface and the static route to3.33.3 static route.5. advanced ping commandsWhile you can use the ping command with parameters to perform some special functions on your computer, you can also use the advanced ping command on the routerto extend the functionality of ping. On router R1, the advanced ping command is executed as follows.Rltping Enter ping directly to enter ,use the advanced pinq command a Protocol[ip]:The protocol used is 12 ,enter directly. TargetIP address: 12.1.1.2 ping's target billet addressRepeatcount[5]: 20Datagram size [100]: the number of ping packets, the default value is 5, here enter 0 Timeoutinseconds [2]: the default size of ping packets is 100 bytes Extendedcommands [n]: y the default timeout time is 2 seconds, no answer within 2 seconds is considered timeout. Whether to further Source address orinterface:Extendedcommands *Select extended here , 192.168.1.1If not, the router will use the nearest port for ping, that is, use 12.1.1.loping, here is another interface of router R1 Ea. The billet address of router R1 is used as the source address to ping. Type of service [0]: The next options are beyond the scope of the CCNA discussion, so enter them directly. Set DF bit in IP header? [no}: Validate reply data? [no]:' Data pattern (OxABCD]:: Loose, Strict, Record, Timestamp, Verbose[none]: Sweeprange Typeofsizes [n]. : escape Sendingsequencetoafeort.' 20,Packetsent 100-byteICMP,. ,Echosto12.1.1.2,timeoutis2seconds::withasource .addressof192.168.1.1