when does the new ccna exam start

when does the new ccna exam start.Verify the server port. Enter the password.Select the FTP and TFTP root folders.Check if this is a multi-homed server (with two NIC cards). Define the installation folder. Verify with the summary page. Wait for the installation to complete. You can access the local WCS by selecting Start>AllPrograms>,and then selecting the WCS group.If you use the WCS asIf a service is installed, then that service should start automatically. If WCS and IIS are installed on the same machine, then you may encounter some problems because both WCS and HS will try to get port 80. To resolve this issue, either make sure that HS is not installed before you install WCS, or close IIS. open a web browser and browse to the IP address of the WCS server. Use the password you defined during the installation process. After logging in, you will see the main WCS page, called WCSHome. as shown in Figure 18-1, the WCS home page contains many tabs and some common monitoring terms.Figure 18.1 WCS Interface 18.2 Basic Topics 294After installation, the first thing you need to do when logging in for the first time is to add a license key to WCS. This license key should be in a usable digital form. You will need to select Help>Licensing, and then consult and upload that key. If you do not do this, you will not be able to add a controller.18.2.3 Management Options in WCS In the WCS interface, there are tabs or horizontal menus for accessing various configurations, including the following.Monitor (Monitor) oReports ( Reports).o Management ( Administration). Each of these menus has drop-down submenus that can be accessed.