ccna 3 chapter 2 pdf

ccna 3 chapter 2 pdf.4.1.3.3 Creating Rules88 Chapter 4 Implementing Firewall Technologies CCP refers to ACLs as access rules. With CCP, administrators can create and apply standard rules (standard ACLs) and extended rules (extended ACDo The following are the steps to configure standard rules using CCP. Step 1 In the CCP menu, select Configure> Router>ACL> ACLEditor. Step 2 Click Add, and the AddaRule window appears. Step 3 In the AddaRule window, enter a name or number in the Name/Number field. Step 4 Select StandardRule from the Type drop-down list. you can also enter description information in the Description field (optional). Step 5 Click Add, out of the AddaStandard RuleEntry window. Step 6 From the SelectanAction drop-down list, select Permit or Deny. Step 7 From the Type drop-down list, select the address type.A Network-applies to all IP addresses in the network or subnet.A Host Name or IP Address ---------- to apply to a specific host or IP address.Any IP address -------- applies to any IP address. Step 8 Complete the following fields based on the address type selected from the Type drop-down list.IP Address ----- If "ANetwork" is selected in Type, enter the IP address.Wildcard Mask------- if "ANetwork" is selected in Type, select a wildcard mask from the Wildcard Mask drop-down list, or enter a custom wildcard mask.Hostname/IP ------ If "AHostName orIP Address" is selected in Type, enter the host name or IP address of the host. If you enter a host name, the router must be configured to use a DNS server.Step 9 (Optional) Enter the description information in the Description field. The description information must be less than 100 characters. Step 10 (Optional) Check Log matches against this entryo Depending on the configuration of the system log on the router, matches can beThe matches can be logged in the local log buffer or sent to the syslog server or both. Step 11 Click OK. Step 12 Continue adding or editing rule entries until you complete the standard rules. If you need to adjust the order of the rule entries, . You can use the