ccna 200-301 exam experience

ccna 200-301 exam experience.Static-Length Subnet Mask (SLSM) The same subnet mask used by all subnets in a single Class A, Class B, or Class C network.Simple Network Management Protocol (SNMP) is an Internet standard protocol designed to manage devices on an IP network. Devices that typically support SNMP include routers, switches, and servers. It is primarily used in network management systems to monitor devices connected to the network for conditions that warrant the administrator's attention. SNMP is a component of the Internet Protocol package defined by the Internet Engineering Task Force (IETF). It includes a set of standards for network management, including an application layer protocol, a database table, and a set of data objects.SNMPagent A Simple Network Management Protocol agent located on a managed device. The software is used to process messages sent by the Network ManagementStation (NMS).Spanning Tree Protocol (STP) - A protocol defined by IEEE802.1d. Allows switches and bridges to create a redundant LAN, and this protocol dynamically causes some port blocking traffic so that the bridge/switch forwarding logic does not cause frames to form wireless loops around the LAN.SplitHorizon A distance vector routing technique that prevents a router that receives routing information from sending that information through the receiving interface. Horizontal splitting is moreNewly used to prevent routing loops.SSL See Secure SocketsLayero StandardAccessList A list of IOS global configuration commands that match only the source IP address of a packet to determine which packets will be dropped and which packets can be passed.to determine which packets will be dropped and which packets can pass through the router.Startup-config file In Cisco IOS switches and routers, this file is located in NVRAM memory and holds the configuration information for this device. When this device is next booted or reloaded, the contents of it are loaded into RAM as the running-config file.Stateful DHCP A term used by IPv6 as opposed to stateless DHCP. Stateful DHCP records information about the client that assigned the IPv6 address (status information).