ccna 200 301 network simulator lite

ccna 200 301 network simulator lite.Jan 15 14:50:58.098 OSPFv3-2-IPv6 ADJ Gi0/0: Jan 15 14:50:58.098 OSPFv3-2-IPv6 ADJ Gi0/0: 2WAir Jan 15 14:50:58.098 OSPFv3-2-IPv6 ADJ Gi0/0: Jan 15 14: 50:58.098 OSPFv3-2-IPv6 ADJ Gi0/0: Jan 15 14:50:58.098 OSPFv3-2-IPv6 ADJ Gi0/0: 0x0013 flag 0x7 len 28Jan 15 14:50:58.102 OSPFv3-2-IPv6 ADJ Gi0/0: 0x0013 flag 0x7 len 28 mtu 1500 |tate EXSTART Jan 15 14:50:58.102: OSPFv3-2-IPv6 ADJ Gi0/0: NBR Negotiation Done. we are the SLAVEAdded 3.3.3.3 to nbr list 2 Way Communication to 3.3.3.3, state DR: 3.3.3.3 (Id) BDR: 2.2.2.2 (Id) Nbr 3.3.3.3: Prepare dbase exchange Send DBD to 3.3.3.3 seq 0x2AC5B307 opt Rev DBD from 3.3.3.3 seq 0xBD091ED opt16.2 Base Content 361Jan15 14:50:58.106:OSPFv3-2-IPv6ADJGi0/0:ExchangeDonewith3.3.3.3362 Chapter 17 Implementing IPv6 OSPF Example 17-8 (continued)As with OSPFv2, working OSPFv3 neighbors will stabilize in the fiill state, or 2-way state. Most neighbors will reach the fiill state, meaning that the two exchange their LSDBs directly and fully with each other. however, for any OSPF network type that uses a Designated Router (DR), only neighbor relationships that use DRs and Backup DRs (BDRs) will reach the full state. Routers that are not DRs or BDRs - DROther routers - the neighbor relationship between them will stabilize in the 2-way state. Troubleshooting OSPFv3 NeighborsWhenever OSPFv3 is unable to learn a route that should be in learning, review the expected OSPFv3 neighbor relationship. Then, if you find that the relationship does not exist, or exists but is not in the expected state (fiill or 2-way), you can focus on the reason why the neighbor relationship is not working.Tip: As with OSPFv2, neighbors in the full state should be fully adjacent, while two DROther neighbors that have reached the 2-way state are simply adjacent.Troubleshooting OSPF neighbor relationships requires you to remember many of the details that prevent two routers from becoming neighbors. Fortunately, OSPFv3 uses the same list as OSPFv2, with one significant difference: OSPFv3 does not require that neighbors be on the same subnet. Table 17-2 lists the items to consider when troubleshooting OSPF neighbor relationships.