ccna 200 301 exam voucher

ccna 200 301 exam voucher.17.2.1 OSPFv3 ConfigurationCisco expects you to know some of the details of the ICND1 exam on OSPFv3, but for the ICND2 exam, you should remember all of the ICND1 OSPFv3 topics, as well as some of the new knowledge and skills. This chapter has two main atmospheres, the first of which will introduce OSPFv3 configuration, review the configuration topics from ICND1, and supplement some of the ICND2 content. New topics include multi-area OSPFv3 configuration, setting OSPF overhead, load balancing, and injecting default routes.OSPFv3 ICND1 Youself ReviewThe first step is to review the OSPFv3 configuration, which is a topic you have studied for the ICND1 exam. The following list summarizes the OSPFv3 configuration steps included in ICND1. Words Step 1 Create an OSPFv3 process number, and then use the ipv6routerospfprocess-id global command to enter OSPF configuration mode for that process.configuration mode. Step 2 Ensure that the router has an OSPF router ID by either of the following methods.a.Configure the router-idid-value router subcommand.b.Configure the IP address on the return interface (select the highest IP address of all working loops).c.Depend on the interface IP address (select the highest IP address of all non-working loops). Step 3 Configure the ipv6ospfprocess-idareaarea-number command on each OSPFv3-enabled interface to enable the11.2 Base content 351OSPFv3,and set the area number of the interface. Step 4 (Optional) If you cannot, or should not, find any neighbors on the interface, then use the passive-interface type number interface subcommand to configure the OSPFv3 interface as passive. Before I begin the multi-zone configuration. allow me to digress slightly from the OSPF exam topic. Frankly, the (at the time of writing this book) OSPF exam topics shy away from the dividing line of whether you need to know about multi-zone OSPF (0SPFv2 and OSPFv3) configuration. The configuration-oriented exam topics only clearly indicate single-area configurations, while the troubleshooting topics may imply that you need knowledge of multi-area configurations. The good news is this: once you understand the concept of multi-area and single-area configuration, adding a multi-area configuration is very simple. So, this topic will illustrate the details of multi-areas, and perhaps you will need this information for the exam.