ccna 200 301 syllabus of errors democracy jeans

ccna 200 301 syllabus of errors democracy jeans.Metric=[/fl*Bandwidth+(AT2*Bandwidth)/(256-load)+Ar3*Delay]*[^5/(reliability+A?4)]By default, K\ and K3 are equal to 1,K2, K4 and K5 are equal to 0. The formula for calculating the EIGRP metric simplifies to Metric=Bandwidth+ Delayo As described earlier you can use the command wRouter(config-router)#metric weights tosklk2k3 k4k5w to adjust the weight of each metric. K1 affects bandwidth, K2 affects load, K3 affects latency, and K4 and K5 affect reliability:.Metric^ 10000M/i. and the minimum link bandwidth between the target + the sum of all link delays between the source and the target /10)*256When calculating the EIGRP metric, it must be clear that the so-called bandwidth is the bandwidth of the lowest link between the source and the target; the so-called delay is the sum of the delays of all links between the source and the target in microseconds, and then divide by 10. Here to calculate the metric for the network where the Loopback0 interface is located on router R1 to R2, on R2 use "showinterfaceloopback 0" command on R2, part of the display looks like this: R2#show interfaces loopback 0 LoopbackO is up,,line protocol is up Hardware is Loopback Internet address is 2.2.2.2/24 MTU 1514 bytes, BW8000000Kbit,DLY5000usee, reliability 255/255, txload 1/255, rxload 1/255 From the above output, we can see that Loopback 0 interface bandwidth is 8000Mb/s,latency is 5000)iso continue to use the "showintfaO/O" command on R1, part of the display is as follows: Rl#show int fa 0/0 FastEthemetO/0 is up, lineprotocol is up ,Hardware: is AmdFE,s address is cc07.0ad4.0000 (bia cc07.0ad4.0000) Internet address is 21.1.1.1/24 MTU 1500 bytes, BW100000Kbit DLY100usee, reliability 255/255, txload 1/255, rxload 1/255 From the above output, you can see that the bandwidth of the FaO/O interface is 100Mb/s and the latency is 100 s. Continuing with the "show intsl/1" command on R1, part of the display is as follows.Rl#show int sl/1 .Seriall/1.is up, line s protocoX is upHardware is M4T "Internet addrfess is 12.1,1.1/24MTU1500bytes, BW1544Kbit,DLT20000tiSec, reliability255/255,txload1/255,rxload1/255 *