ccna 200 301 syllabus of upsc civil services notification

ccna 200 301 syllabus of upsc civil services notification.1. basic RIPv2 configuration The basic configuration of RIPv2 is similar to that of RIPvl and is configured with the following command format.Router (config) #routerrip Starts the RTE routing process. Router (config~router)#version 2 Use the command as you should not ,the default is RHPvL Router (config-router) #network primary class network numberThe main class network of the direct connection is declared, and this is the same as 1. Although R*v2 supports VMM, the main class network address is still added when declaring the network. 2.RIPv2 supports VLSM. Here, use RIPv2 to complete the configuration shown in Figure 6-4-3:Router>en Routertconf t Router(config)#host R1 R1 (config)#int sl/1 R1 (config-if)#ip add192.168.1.65 255*255.255*252 R1(config-if)#noshut R1 ( config-if)#int loO Rl(config.if)#ip add 192.168.1.1 255.255.255.192 R1(config-if)#router rip R1 (config-router)#version 2 Declare version 2.R1 (config-router)#net 192.168.1.0 Join the directly connected primary class network number.Router>en Router#conft Router(config)#host R2 R2(config)tint sl/0 R2(config-if}#ip add 192.168.1.66 255,255.255.252 R2(config-if)#noshut ; R2( config-if)#intloO ' "k184R2(config-if)#ip add 192.168.1.130 255.255.255.192 R2(config-if)#router rip R2(config-router)#ver 2 R2(config-router)#net192.168.1.0192.168.1.0/24 is variably subnetted, 3 subnets, 2 masks 192.168.1.64/30 is directly connected, Seriall/1 192.168.1.0/26 is directly connected, LoopbackO 192.168.1.128/26 [120/1] via 192.168.1.66, 00:00:00, Seriall/1