ccna 200 301 syllabus of upsc mains 2017

ccna 200 301 syllabus of upsc mains 2017.. Per-packet-based load balancing, called process switching. . Per-destination-based load balancing, called fast switching. If process switching is enabled, the router will alternate paths on a per-packet basis, that is, the first packet will use the first path, the second packet will useuse the second path, and the third group uses the first path again, and having multiple load balancing paths performs similarly. If fast switching is enabled, only one path to the destination address is cached, and all packets arriving at the specified address use the same path. Turn off fast switching with no ip cef, use process switching, and test again with the following display.Rlfrconft Enter configuration commands, one per line. end withCNTL/Z.Rl (config)#no ip cefSending 5, 100-byte ICMP Echos to ! ! ! ! ! 23,1.1.2, timeout is 2 seconds:Success rate is 100 percent (5/5) round-trip min/avg/max = 8/32/52 msRl(config)#1 01:30:56.311: *Mar 1=01:30:56.363: *Mar 1 01:30:56.391: *Mar 1 01:30:56.395: *Mar 1 01:30:56.439: ICMP: ICMP; ICMP: ICMP: ICMP: ICMP: echo echo echo echo echo reply reply reply reply reply reply reply rcvd, src rcvd, 23.1.1.2, src rcvd/ src 23.1.1.2, rcvdr src rcvd, 23.1.1.2, src 23.1.1.2, 23.1.1.2,Rl(config}#do ping 23.1.1.2From the output above, we can see that Rl's packet to 23.1.1.2 performs load balancing (from the returned addresses are 13 1.1 and 12 1.1 respectively, we can conclude this).