ccna 200 301 syllabus of upsc prelims

ccna 200 301 syllabus of upsc prelims.belong to the 128.107.23.96/27 subnet, nor to the 128.107.23.128/27 subnet, but to the 128.107.23.0/24 subnet and the 0.0.0.0/0 subnet, and according to the first of the routing principles - longest match first - the packet will be sent to 190.17L23.12o11. solution: bdThe question asks: what are two disadvantages of performing link-state routing protocols? Link-state routing protocols take up a lot of memory and CPU resources when executing link-state routing algorithms. In addition, route aggregation for link-state routing protocols can only occur at the boundaries of an area, which requires a hierarchical IP address architecture for link-state routing protocols. In summary, the correct answers are B and D.160 AiiiiiuiiMMi||WiiHiiiiua gw grmiffiuBhiiiMMwwffli#" " 11________________ _____________________________^3UJ^L -R|p***This chapter describes the main features of RIP, the use of RIP timers, the configuration of RIPvl, the role of VLSM and CIDR, the limitations of RIPvl, the configuration of RIPv2, and the route finding process.<>6.1 RIP Overview ***RIP (Routing Information Protocol) is an older and more commonly used Interior Gateway Protocol (IGP) for small, similar networks. The RIP protocol is an international standard that has been tested in practice for a long time, is widely used in the networking community, is supported by all router vendors, and is easy to configure and troubleshoot in a variety of operating systems. RIP works well in networks that do not have redundant links, but the biggest drawback of RIP is that it cannot be used effectively in networks that have redundant links. So for large networks or networks that need to have redundant links, it is necessary to consider other routing protocols.