ccna 200 301 syllabus uaeh docente mas

ccna 200 301 syllabus uaeh docente mas.(3) Save the running configuration file. The configuration that currently works is the running configuration file, and if the running configuration file is not saved, the previous running configuration file will be lost after the router reboots. If there is a startup configuration file in the router, the startup configuration file will be copied to memory and become the running configuration file; if there is no startup configuration file in the router, the router will prompt whether to enter Setup mode. You can use the following command to save the routers running configuration file with the following command.Rl#copy running-config startup-config - Generally abbreviated to GOQY run starts overwrites the running configuration file withstartup-config file.k 117Wills Heading and Hiding Chapter 4 Cisco Routers **104RUwrite is generally abbreviated to wr,overwriting the startup configuration file with the run configuration file.(4) Copy the running configuration file to the TFTP server.Unzip the tftpserver.rar file from the CCN ANEW .rar file on the real computer' Double-click the tftpserver.exe file to begin installing Cisco's TFTP server software. Double-click the "CiscoTFTPServer" shortcut icon on the desktop to start the TFTP service. Router R1 is executed as follows.Rl#copy startup-config tftp Address orname ofremote host [ ]? 192.168.1.2 Enter the work R address of the TFT2 server. Destination filename [rl-confg]? The name of the file to be copied to the TFTE server.