A. ip route 209.165.201.0 255.255.255.224 209.165.202.130
B. ip route 0.0.0.0 0.0.0.0 209.165.200.224
C. ip route 209.165.200.224 255.255.255.224 209.165.202.129 254
D. ip route 0.0.0.0 0.0.0.0 209.165.202.131
Correct Answer: C
ccna 200-301 exam cost india.If the boot system command is not found in NVRAM, or if the boot system command fails to boot, the router will load the first image file in flash memory. If there is also no valid OS image file in flash memory or if flash memory is not found at all, the router attempts to load the image file from the TFTP server by sending a TFTP request for the OS image to the broadcast address.If the IOS load fails, a scaled-down (Scaled-downversion) version of the IOS is copied from ROM to RAM, and this version of the IOSk 90Chapter 4 Cisco Routers** 04is used to help diagnose the reason why the full version of the IOS cannot be loaded.4. locating and loading the configuration file (Startup-config)The configuration file is created by the administrator and includes the address of the interface, routing information, password, and some other configuration. Among other things, the contents of the stored configuration are interpreted by the operating system, which instructs the router how to perform the various functions contained therein. For example, a configuration file may define one or more access control lists and require the operating system to set up different access control lists to access different interfaces to provide a level of control over the packets flowing into that router. Although the configuration file defines how the various functions that affect the operation of the router are accomplished, it is actually the operating system that does this work, due to the fact that the operating system interprets and responds to the requirements stated in the configuration file.After the IOS is successfully loaded, the router looks for the configuration file saved in NVRAM. If found, the router copies it into RAM and executes it. Startup-config is copied into memory and is called Running-config, which allows the router to start working according to a predefined network environment. If the configuration file does not exist in NVRAM, the router may also search for a TFTP server and attempt to load the configuration from the TFTP server.If the router fails to load the configuration file, the router displays "Would you like to enter the initial configuration dialog?[yes/no]:w , and if you answer "yes", it enters initial configuration dialog mode, follow the predefined sequence of questions to configure; if you answer "no", then enter the command line configuration mode, the router prompts "Press RETURN to get started!", press ENTER to continue, the router will display some interface information, and out "Router" prompt. Command configuration is powerful, and the command line configuration mode is used in this book.When the operator stores configuration information on NVRAM, the next time the router reboots, it will load the configuration saved in NVRAM. If the value of the second bit of the configuration register from the right is set to "4, the router will ignore the contents of NVRAM when it boots up. This feature can be used when recovering the router's password, and in practice is used more often in an experimental environment, where one participant finishes the experiment and the next participant reboots the device without loading any configuration when the router boots up. The configuration register value of all routers in the CCNA rack is set to 0x2142, and the configuration file is not loaded at startup. If you want to load the user's configuration file, change 0x2142 to 0x2102o for the corresponding device in w\labini\ccna.netv
A. ip route 209.165.201.0 255.255.255.224 209.165.202.130
B. ip route 0.0.0.0 0.0.0.0 209.165.200.224
C. ip route 209.165.200.224 255.255.255.224 209.165.202.129 254
D. ip route 0.0.0.0 0.0.0.0 209.165.202.131
Correct Answer: C
A. to analyze traffic and drop unauthorized traffic from the Internet
B. to transmit wireless traffic between hosts
C. to pass traffic between different networks
D. forward traffic within the same broadcast domain
Correct Answer: C
A. switchport mode trunk
B. switchport mode dynamic desirable
C. switchport mode dynamic auto
D. switchport nonegotiate
Correct Answer: B
A. transfers a backup configuration file from a server to a switch using a username and password
B. transfers files between file systems on a router
C. transfers a configuration files from a server to a router on a congested link
D. transfers IOS images from a server to a router for firmware upgrades
Correct Answer: D
A. different nonoverlapping channels
B. different overlapping channels
C. one overlapping channel
D. one nonoverlapping channel
Correct Answer: D
Exam Code: 200-301
Exam Duration: 120 minutes
Exam Topics:
Latest Update: 11.21,2024
For office workers or college students, TOPONEDUMPS CCNA 200-301 dumps are all selected by professional instructors which cover significant and fundamental exam questions to save you precious time to study. All you need to do is to make a plan according to CCNA 200-301 dumps we provide at your convenient time.
Besides, with 100% real of CCNA 200-301 practical testing, you can access a remote server for simulated exams to well master the knowledge of the CCNA 200-301 test.
What's more, with private tutoring and customer service, TOPONEDUMPS employees will help you with all kinds of difficulties, challenge questions during CCNA 200-301 dumps you study as well as tips on how to pass the CCNA effortlessly.
To possess the CCNA Certificate and higher salary with TOPONEDUMPS assistance.
With 100% correct and valid exam questions and corresponding answers, TOPONDUMPS will help you know all the exam structure and how to answer correctly. Pass the CCNA 200-301 Exam in a short time of preparation for exams with our assistance.
Always providing you with the latest updating dumps of the CCNA 200-301 Exam. No need to spend much time googling questions and answers on the internet.
The professional customer consultancy service team is 24/7 online and offering you the latest news and tips on how to study and prepare for the CCNA 200-301 Exam.
Payment
Deliver Dumps
30day Free Update
Training,Pass Exam
We provide stable and high-quality real exam dumps, you only need to remember the contents of the dumps will be able to easily pass CCNA 200-301 Exam
We will follow the latest exam trends. Once the exam content changes, we will immediately update dumps to ensure stability and send them to your email.
We will update the free charge of the latest material for you as soon as possible after the change. Your service time will start from our stable date again.
When you complete the bill. We will send you the dumps information via email.
We accept multiple payment methods. Most customers use online payment with PayPal or Western Union. PayPal and Western Union are both very secure payment methods.