ccna 200-301 network simulator ns2 simulator for windows

ccna 200-301 network simulator ns2 simulator for windows.27. solution.C QUESTION Q: Referring to the diagram, the receiver and sender send data in a negotiated window size of 3. Based on what the diagram shows and the characteristics of TCP/IP transfers, what information will the receiver return to the sender? The diagram shows that the sender sends 3 bytes to the receiver, and the prerequisites state that the senderThe receiver and the receiver have agreed that the window size is 3, so the receiver can receive the 3 bytes normally, then the receiver will send back ACK 4, indicating that the next byte number expected to be received is 4, which also implies that the previous 3 bytes are received normally.28.Solution.BD QUESTION Q: Which...which of the following describes a private IP address (choose 2)? Private IP addresses cannot be passed over a public network. There is a growing shortage of IPv4 addresses, and to solve this problem, private addresses can be used on a LAN. if a device with a private address needs to communicate with an external network, it can do so byNAT converts this private address to a public address, which not only saves the public address, but also serves the purpose of hiding the internal address. Options A, C, and E all describe the characteristics of a public address.Question C asks: If a router's Ethernet port is assigned an IP address of 172.16.112.1/20, what is the maximum number of hosts allowed on this subnet?few hosts? The number of hosts that can be accommodated on this subnet is 2 eat 2 = 4094. 4093 would be a more appropriate option because 4094 is subtracted from the one address occupied by the router interface.30.Solution: Question C asks: Referring to the figure, which IP address will be assigned to workstation A? The figure gives the IP address 192.168.1.158/28 for the router's LAN interface, as long as Workstation A's IP address is on the same subnet as the router interface, but it cannot be a subnet address or a subnet broadcast address. Using Section 2.5.5 of this chapterExample 2 in method two, 192.168.1.158/28 host bits have 4 bits, the number of IPs that can be accommodated in each subnet is 16, the IP address of the subnet being divided is assigned as follows.