valid dump ccna 200-125

valid dump ccna 200-125.Enable 802.1lg Network [YES][no]: yes EnableAuto-RF [YES][no]: yes Configure a NTP server now? [YES][no]: no Configure the system time now? [YES][no]: NoWarning I No AP willcome up unless the time isset. pleasesee documentation formore details.If yes, system willsave itand reset. [yes][NO]: yesAfter completing this configuration via the CLI, you can browse for the IP address of the management interface.To access the controller via a web browser, simply enter the IP address of https:// in the address bar of your browser. IP address can be either the address configured in the CLI wizard, you can also be the default address "192.168 also the controller login screen as shown in Figure 15.3. Note that the method of connecting via HTTPS is safe and secure. Click the Login button and enter the user name and password in order to make the relevant settings. After logging in correctly, you can see the summary page, as shown in Figure 15-4.The summary page displays information such as controller status, AP status, and TopWLANs. Any changes are logged and can be viewed on the Summary page.Note: The Wireless Express controller web interface is very similar to the WLC web interface used in the CUWN architecture.When it comes to the controller, you don't need to do much work. Both the AP and the controller automatically detect each other. As you can see in Figure 15-5, the AllAP option under the WIRELESS menu shows a discovered AP0Selecting an AP name takes you to that AP page, where you can enter details related to that AP, such as name and primary controller, as shown in Figure 15.6. APs can also be enabled or disabled through this menu, and other options include restarting the AP and clearing the AP configuration.231 Chapter 15 Cisco Mobility Express