todd lammle ccna 200 301 pdf

todd lammle ccna 200 301 pdf.ap-ip-address, telnet-username, telnet-Passv^ord, enable-password Create a new line for each AP you want to convert. When finished with the text files, save them where you can find them, and name them APList.txto you will browse them in the Upgrade tool interface. The last preparatory step is to make sure that the upgrade code is on the local machine. The steps described in the previous paragraphs detail where you can get this code, so make sure it is already on the device. Since the AP is being upgraded using the TFTP protocol, you can use Tftpd3, which can be downloaded from http://tftpd32.jounin.netor you can use the TFTP server integrated in the Upgrade tool. The entire upgrade process is as follows. Step 1 Open the Upgrade tool. Step 2 In the IPFile field, select the... button (this button is called an ellipsis and looks like three dots), select the APListtxtfile, and click the Open button, as shown in Figure 14-8.Step 3 In the UpgradeOptions field, select all applicable options. These options are about how the upgrade is handled. For example, whether the AP is upgraded over the WAN link, whether the AP should be converted to DHCP after the upgrade, and whether the AP keeps its existing host name after the upgrade. Select the check boxes according to your needs and network realities. In Figure 14-9, the AP will retain its host name.Step 4 In the LWAPP RecoveiyImage area shown in Figure 14-9, select the TFTP method you want to use, either the Upgrade tool's own method or using an external application such as Tftpd32, then select LWAPP Recovery Image, and in the Max.AP at run field, select Maximum number of APs that can be upgraded at a time.216 Chapter 14 Converting Standalone APs to LWAPPOpen CancelFigure 14-8 Selecting the APList.txt FileFigure 14.9 Upgrade Tool Options14.3 Pro forma Tasks 217