tccna x

tccna x.Clicking details will give you a list of clients, as shown in Figure 13.24. From there you can see the MAC addresses of the clients, which AP they are associated with, and the WLANprofile and protocol used.Figure 13-24 Client.In the example in Figure 13-24, the client with the MAC address 00:le:c2:ab:14:26 is associated with the Public_Guest_Accessprofile. Next, you can obtain the status of the client, which in this example is "Associated. o Again, the client has to be authenticated and port 1 on the controller is the path to the wired network. The client is not a workgroup bridge.As seen in the other examples, move the mouse over the blue arrow on the right to get a list of options, including thethe following items.204 Chapter 13 Simple Network Configuration and Monitoring with Cisco Control VolumesLinkTestoDisableoRemove o 802.11aTSMo 802.11b/gTSMo LinkTest provides a method of testing client links by reporting the number of packets sent and received, signal strength, and signal-to-noise ratio ( SNR, Signal-to-Noise RatioRatio), providing a method of testing client links. Disabling a client means placing the client in the DisabledClient list and making the client unavailable until the client is manually removed. To view this list, select Security>DisabledCUentso you want to add the client manually, click the New button. The Remove link can disconnect the client. However, this does not prevent the client from trying to associate again, unlike disabling. More detailed information can be obtained by clicking on the client MAC address, which when clicked will display the Detail page as shown in Figure 13.25, including the following five sections. .ClientProperties o .SecurityInformationo