should i take ccna or ccent

should i take ccna or ccent.Step 3 Click the Apply button.Success! You now have an available WLAN, as shown in Figure 13.9. As long as the connected wired network is working properly, the WLAN will also function properly.Figure 13-9 lists the WLAN profile4. Naming the APYou may also want to make some minor adjustments to the network. For example, suppose there are two APs, one in the hall and the other in the research lab. But you don't want anyone to use GUESTNET to access the AP in the research lab. Simply control the APs that allow GUESTNET access. First, you should identify which AP is in the hall and which AP is in the research lab. Figure 13-10 shows two APs that use MAC addresses as AP names.This can be confusing and it is recommended that the AP names be changed to meaningful names. The following are the steps to implement this process. Step 1 Find the MAC address of the AP in the lobby, which is printed on the bottom of the AP. Step 2 Once you have found the MAC of the AP in the lobby, go to the WLC screen and navigate to WIRELESS>AccessPoints>The AP name starts with "AP" followed by the MAC address. Step 4 Under the General tab, change the name to Lobby.AP.13.2 Basic Topics 191Note: When moving APs within the network, the name will follow the AP, so it is important to update the name of the controller if an AP is removed or replaced. Also, it is best to label the CiscoPoE switch ports with the same name. This is helpful when troubleshooting and when you may need to shut down the switch port to provide remote power cycle to the AP.Step 5 Feel free to add a location. you can see this step in Figure 13-11. Step 6 Click the Apply button. Step 7 Next, select another AP.