setting up ccna home lab

setting up ccna home lab.After the controller reboots, you will be prompted for a user name. The user name is, of course, the one you created in the CLI wizard.EnterUserName(or 1Recover-Config'thisone-time onlytoresetconfigurationtofactorydefaults)User: admin182 Chapter 13 Simple Network Configuration and Monitoring with Cisco Control VolumesPassword:***** (Cisco Controller)>Once authenticated, you can familiarize yourself with some of the commands available in the CLI. Press the question mark (?) key to get a list of verbatim commands. Similar to Cisco routers and security devices, the ? key can be followed by a letter so that you can get a list of commands that begin with that letter. For example, entering the P? command shows that ping is available. If the command is unique, the space bar can be used to complete the command. ping is a common command for verifying connections. Another common command is the command used to save a file. Unlike Cisco routers, copyrun start does not work here; instead, the saveconfig command is used. In Example 13U, you can see the process of saving the configuration. After entering the command, you will be asked to confirm it. You do not need to press Enter after making a selection, just press y to agree and n to deny.Example [3.4 Saving Settings from CU(Cisco Controller) >save config Are you sure you wantto save? (y/n) yConfiguration Saved! (Cisco Controller)>Just as the router has a global configuration mode, so does the controller. Accessing the controller's configuration mode is a little different than you might expect, and you need to follow the config command with what you want to configure. For example, if you want to configure 802.11a parameters, type config 802.11a?o The reason you need to type ? because the full string must be entered, and the question mark can help find that syntax, as shown in Example 13-5.