n+ vs ccna

n+ vs ccna.Corpus f. Table 22 Comparison of FCC Antenna Requirements in a Point-to-Point Environment with Cisco Standardssrnnr* TTTransmitter Power Maximum Gain EIRPFCC maximum 30dBm 6dBm 36dBmCisco maximum 20dBm 36dBm 56dBmTable 2-3 compares the FCC maximum requirements in a point-to-multipoint environment with the Cisco maximum. /WfTable 2-3 Comparison of FCC Antenna Requirements in a Point-to-Multipoint Environment with Cisco StandardsweluTransmitter Power King Booster EIRP2. ETSI (European Telecommunications Standards Institute) is a non-profit organization that standardizes frequencies and power levels used in Europe and in many other countries. The European Commission (EC, European Commission) recognizes ETSI as the official European standards organization. Many wireless applications are licensed by the EC, and ETSI has developed various standards based on this. According to the ETSI website, ETSI has nearly 700 members in 60 countries. Similar to the FCC, you should be aware that ETSI also has a 2.4GHz EIRP output rate standard. However, ETSI's rules are different from the FCC's rules. The EIRP defined by ETSI is 20dBm for both point-to-multipoint and its point-to-point with 17dBm maximum transmit power and 3dBi gain.the same, it is easier to remember. Of course, a professional installer can also increase the gain, as long as he or she sets the transmit power at a ratio of I:1 below 17 dBm. Thus, a professional installer can reduce the transmit power by l dBm and increase the gain by l dBm,18 Chapter 2 Standards Body