cisco ccna 200 301 v1 0 full certification prep course

cisco ccna 200 301 v1 0 full certification prep course.In this example, there is only one neighbor - 192.168.4.10L Table 20.3 explains the various outputs of this command.Table 20.3 Output Fields for the Command show ip eigrp neighborsIf you see a log message stating that the current router and the neighboring EIGRP router are "not in the same subnet," it means that either the IP address of the current router is incorrectly configured or the IP address of the neighboring router is incorrectly configured so that they are not in the same subnet.Video 20.04 A multimedia demonstration of using the command show ip eigrp neighbors on a router is included in the digital resources that accompany this book.The command show ip eigrp neighbors displays the EIGRP routers that have established an adjacency with the current router along with their IP addresses, retransmission intervals, and queue counts. If you do not see neighbors, make sure that the network command in the EIGRP routing process contains the interfaces connected to the neighbors.20.4.4 Command showip eigrptopologyTo view the successor and feasible successor routes and other routes learned from EIGRP neighbors, use the command show ip eigrp topologyRouter# show ip eigrp topology IP-EIGRP Topology Table for AS(200)/ID(192.168.4.100)Codes: P -Passive, A -Active, U -Update, Q -R -Reply,r -Query, Reply status P 10.10.10.0 255.255.255.0 2 successors, FD is via 10.10.1.1 0(46251776/46226176) z EthernetO via 10.10.2.1 (46251776/46226176),