cisco 200 301 study material

cisco 200 301 study material.1. Go to Router 2600-1 and see what directly connected neighbors the router has and what the IP address of Router 2600-2 is. Click the tab Labs in the lower left corner of the window, then click the tab McGraw-Hill in the upper left corner (right of the tab Standard and Custom) o Click the tab Lab Instructions and select 2600-1 from the drop-down list Devices, or click the tab NetMap, then double-click the device icon 2600-lo and use the command show cdp neighbors to view the 2600-1's neighbors You may need to wait 60 seconds to see all neighbors connected to the device (run this command again if necessary). You will see a 2950 switch, and router 2600-2o Use the command show cdp neighbors detailto see the address of the 2600-2: this address is 192.168.2.2.2. go to switch 2950-2o to see the neighbors directly connected to this switch. Which neighbors do you see? What are their IP addresses? Click the tab Lab Instructions and select 2950-2 from the drop-down list Devices, or click the tab NetMap and double-click the device icon 2950.2. Use the command show cdp neighbors to view the neighbors. You should see switch 2950-1 and router 2600-1. switch 2950-1 will appear twice because it has two connections to switch 2950-2. Add the parameter detail,to the previous command to see the IP addresses of the neighbors.At this point, you should be more familiar with some of the troubleshooting tools for the router.Authentication Target 16.0616.6 LicensingThis section describes licensing for Cisco ISR G2 routers. Licensing is becoming more common on many Cisco platforms, and even Cisco switches are starting to support feature licensing. Prior to IOS version 15, Cisco offered up to 12 different images for each model of device. For simplicity reasons, Cisco now offers only 4 images.. IP Base.. Data (MPLS and ATM) ;. Unified Communications (VoIP and IP telephony) ;