ccna wireless pdf free

ccna wireless pdf free.3. support multipleVLAN connections are called trunk connections.4. Ao802.1Q supports native VLANs, so point-to-point and point-to-multipoint (hub) connections can be used. b is incorrect because the 2960 switch supports 802. IQ; c is incorrect because no native VLAN traffic is tagged; d is incorrect because the original Ethernet frame is modified - insert a VLAN field and recalculate the FCSoVLAN Trunking Protocol (VTP) is a Cisco-specific protocol for sharing VLAN configuration information between switches through trunk connections.6. co switches in any VTP mode propagate VTP messages, but only the client and server process them. a is incorrect because it does not include transparent mode; b is incorrect because it does not include client and transparent mode; and d is incorrect because it does not include server and client mode.7. A andD. If the domain names are different, they will ignore each other's VTP messages. If the domain names are the same, the VLAN configuration information of the switch with the larger revision number will be used, and the switch with the smaller revision number will delete its VLANs.B is incorrect because the other party's VTP messages will be processed only if the domain names are the same; C is incorrect because the switch with the smaller revision number will delete its VLANo8. vtp transparento9. ao On the 2960 switch, the command switchport mode trunk enables trunking. b is used to enable trunking on the 1900 switch; the commands described in C and D do not exist.10. co On the 2960 switch, the command switchport access vlan assigns the interface to a VLAN o A is incorrect because vlan-membership static is used to assign the interface to a VLAN on the 1900 switch; B is incorrect because vlan creates a VLAN; D is incorrect because switchport mode access sets the interface to an access link connection or a trunk connection.