ccna practice labs packet tracer

ccna practice labs packet tracer.1025 packets, 1536900 bytes//Matching the number of packets and bytes of ICMP traffic5 minute rate 37000 bps //5 minute average rate Queueing queue limit 16 packets queue length (queue depth/total drops/no-buffer drops/flowdrops) 0/0/0/0 ( pktsoutput/bytesoutput)1025/1536900 number of output packets and bytes matching this class of traffic bandwidth16 kbps bandwidth allocated for segment class Fair-queue:per-flowqueuelimit4packets//WFQ: 4 packets per flow queue limit packets shape(average)cir 640000,be 8000,be8000 parameters set by traffic shaping target shape rate640000 //target shaping rate.443. Cisco Networking Lab CCNA Lab Guide (Version 2)21.6.2 Experiment 8: Configuring CAR for Traffic SupervisionThis experiment allows you to master: The working principle of the traffic supervision technology CAR. (2) The configuration and debugging methods of the traffic supervision technology CAR.The experimental topology is shown in Figure 21-5, and the entire network runs 0SPFv2 to achieve network connectivity.R1 (config)#access-list 100 permit icmp any any R1 (config)#interfaceSerial0/0/0 R1 (config-if)#rate-limit output access-group 100 64000 1600 2000 conform-action transmit exceed-actiondrop// Configure the rate limit for the traffic matching ACL100: CIR=64 000bps,Bc=l600Byte,Be=2000Byte, for conform traffic forward normally, for exceed traffic dropCommand rate-limit (input|output} [access-group ACL] C1R Be Be conform-action action exceed-action action The meaning of each parameter is as follows.