ccna hardest question

ccna hardest question.for AS(1) //IPv4 EIGRP process 1 informationEIGRP metric weight Kl=l, K2=0, K3=l,K4=0,K5=0 Display the K value used to calculate the metric valueSoft SIA disabled soft SIA function is disabled.EIGRP NSF-aware route hold timer is 240s Duration of non-stop forwardingRouter-ID: 22.2.2 //EIGRP router IDTopology: 0 (base) Topology 0 informationActiveTimer: 3 min Default S1A timer is 3 minutesDistance: internal 90 external 170 //EIGRP management distance, internal is 90, external is 170Maximumpath:4 The default number of supported load balancing paths, you can modify the number of equivalent paths supported by EIGRP through the maximum-paths number-paths command. EIGRP only adds routes to the local routing table. as for load balancing, it is a function of the router's switching hardware or software and is not necessarily related to EIGRP itself. the maximum value of this experimental environment IOS 15.7 is 32 Maximum hopcount 100..280.Cisco Networking Lab CCNA Lab Guide (Release 2) // Maximum hop count supported by EIGRP, default is 100, maximum is 255 Maximum metric variance 1 //variance value is 1 by default, i.e., only load balancing of equivalent paths is supported by default Automatic Summarization: enabled Automatic Summarization is enabled, default Automatic Summarization is disabled 17231.0.0/16 for Se0/0/l, Se0/l/0 Summarizing 2 components with metric 2169856///Automatic Summarization of 2 subnets