ccna chapter 7 pdf

ccna chapter 7 pdf.2 If you want to delete a VLAN, use the novlan vlanjd command to do so. After deleting a VLAN, any ports assigned to this VLAN will be inactive, so remember to reclassify the ports on this VLAN to the appropriate VLAN, otherwise the ports will be inactive and cannot forward packets, and the ports belonging to the deleted VLAN will not be visible when you execute the showvlan command.3 If no VLAN exists on the switch, the switchport access vlan vlan-id command forces a VLAN to be created with the default name, VLANXXXX,where XXXX is the VLANID,for example, the default name for VLAN2 is VLAN0002o For example, on an interface that is not configured in any way Enter the switchport access vlan 10 command, then the switch displays the following message: %AccessVLAN does notexist.Creating vlan10..110.Cisco Networking Lab CCNA Lab Guide (Release 2) You can use the vlan 100,200,301-307 commands to create multiple VLANs at once.(1) View the information of VLANsSl#show vlan View the information of VLAN VLAN Name Status Ports1 default active FaO/5, FaO/6, FaO/7, FaO/8 FaO/9, FaO/IO, Fa0/l 1,Fa0/l2 Fa0/l3, FaO/14, Fa0/l5,Fa0/l 6 Fa0/l7, Fa0/l 8,FaO/19, Fa0/20 Fa0/21,FaO/22 Fa0/23,FaO/24 Gi0/l, GiO/22 VLAN2 active FaO/1, FaO/2 3 VLAN3 active FaO/3, FaO/4 1002 ftidi-default act/unsup1003 token-ring-default act/unsup 1004 fddinet-default act/unsup1005 tmet-default act/unsup The first column of the above output is the VLAN ID; the second column is the VLAN name, the third column is the status of the VLAN, active or act isBy default, all ports on the switch belong to VLAN1, and two ports are currently divided into VLAN2 and VLAN3. By default, there are 5 VLANs on the switch, including VLAN1 and VLAN1002. VLAN1005, while VLAN1002-VLAN 1005 are the VLAN IDs used by obsolete technologies, so only the VLANs of type Ethernet (enet) are of interest here