ccna certification wiki

ccna certification wiki.Chapter 7 Switched Networks .97 .(2) Logging in to Switch S1 from SSHClient via SSHAfter opening SecureCRT software. select [File] in the menu bar and click [Quick Connect] in the drop-down menu to enter the [Quick Connect] page. as shown in Figure 7-2 for New SSH Connection. In the [Protocol] drop-down menu, select SSH2,.98 . Cisco Networking Lab CCNA Lab Guide (Version 2)In the [Host Name] text box, enter the management IP address 172.16.1.100 for VLAN1 of Switch S1, enter 22 in the [Port Number] text box, which is the default port for SSH service, and enter the login user name ccie in the [User Name] text box, keeping the other default values, and then click the [Connect] button. In the [New Host Key] popup window, click the [Receive and Save] button to receive and save the key sent by the router, as shown in Figure 7-3. Enter the user name and password in the [Enter Secure Shell Password] window shown in Figure 7.4, and click the [OK] button. Figure 7-5 shows that user ccie logged in successfully through SSHS1.Figure 7-2 New SSH connection Figure 7-3 Receiving and saving the key sent by the routerFigure 7-4 Entering the user name and password Figure 7-5 User ccie logged in successfully through SSHS1At this point, you see the following log message on switch S1 for successful login: -DEC 24 15:40:22.047:%SEC_LOGIN-5-LOGIN__SUCCESS: Login Success [user: ccie] [Source:172.16.1.200][localport: 22] at 15:40:22 GMT Mon Dec 24 2018(1)Use the command Sl#showipssh to view SSH basic information Sl#show ip ssh to view SSH basic information SSH Enabled -version 2.0 //SSH running version