ccna certification quora

ccna certification quora.(omit the routing code section here) S 2016:1110::/31 [1/0] //IPv6 summary static routevia Serial0/0/0s directly connected S 2018:3333:764 [1/0] via SerialO/O/1,directly connected3 View the IPv6 island routing table for router R3. R3#show ipv6 route static(Omit the route code part here) S ::/0 [100/0] administrative distance is 100, IPv6 static default route code S is not followed by * via SeriaIO/0/1,directly connected send out interface(3 ) Use the ping command to test the network connectivityRl#ping 2018:3333=3333 source 2016:1111 ::1 Type escape sequence to abort. Sending 5,100-byte ICMP Echos to 2018:3333::3333, timeout is 2 seconds: Packet sent with a source address of2016:1111::!Chapter 5 Static Routing.71.!!!!! Success rateis 100 percent (5/5),round-trip min/avg/max =1/2/4 ms Rl#ping 2018:3333=3333 source 2016:1110::l Type escape sequence to abort. sending 5,100-byte ICMP Echos to 2018:3333:3333,timeout is 2 seconds: Packet sent with a source address of2016:1110::l !!!!! Success rateis 100 percent (5/5),round-trip min/avg/max =1/2/4 msChapter 6 Dynamic Routing and RIPThe ways in which routers construct routing tables include static routing and dynamic routing protocols. As network complexity and network size increase, the advantages of dynamic routing become apparent. Dynamic routing protocols include RIP, OSPF, 1S-IS, EIGRP, and BGP. RIP is typically a distance vector routing protocol and is designed for small network environments. Although RIP is rarely used in modern networks and lacks the more advanced features that other routing protocols have, it is the simplicity of its implementation principles and configuration that is very helpful in understanding the basics of routing. This chapter focuses on the functionality of dynamic routing protocols, classification, features of RIP, the difference between R1P version 1 and version 2, RIPv2 and RlPng configuration, and an in-depth understanding of routing tables.