ccna certification amazon

ccna certification amazon.CiscoAnyConnectSSLVPN for remote access gives users secure access to the corporate network. To support SSLVPN connections, the CiscoASA must be configured. ASDM provides two tools to initialize the SSLVPN configuration on the ASA.VPN Wizard: this is an ASDM wizard that simplifies SSLVPN configuration. To use the ASDM Assistant, select Configurations > Remote Access VPN > Introduction and then click SSLorIPSec(IKEv2) VPN Remote Access (using Cisco AnyConnect Client). To use the VPN Wizard, click Wizards from the menu bar, then select VPN Wizards > AnyConnect VPN Wizard o Note: Here we will use the VPN Wizard to configure Remote Access SSLVPN.9.3.3.2 Example SSL VPN TopologyThe topology in this example has the following settings: Internal network with a security level of 100; DMZ with a security level of 50; External network with a security level of 0. The external host needs an SSLVPN connection to the internal network. Static NAT already provides external access to the DMZ server. The external host does not have Cisco AnyConnect $ client software preinstalled. Therefore, the remote user must use a Web browser to initiate a . No Guestclient SSLVPN connection, and then download and install the AnyConnect client on the remote host. Once installed, the host can use a full channel SSLVPN connection to exchange traffic with the ASA.9.3.3.3 Configuring AnyConnect SSLVPNTo create a full channel SSLVPN configuration, use the VPN wizard and complete the following steps. Step 1 Enable the AnyConnectSSLVPN wizard. Select Wizards from the menu bar,and select VPNWizards>AnyConnect VPN Wizard0 The VPN Wizard Introduction window appears. Click Next to continue. Step 2 Configure a connection profile (profile) identifier. Configure a connection profile name for the connection and identify the interface to which the external user will connect. Click Next to continue. Step 3 Select the VPN protocol. Select how to protect the traffic. The options are SSL and IPSeco. you can also configure third-party authentication. Uncheck the IPSec option and click Next to continue.Step 4 Add the AnyConnect client image (image).In order for the client system to automatically download the CiscoAnyConnectSSLVPN client software from the ASA, you must specify the location of the SSLVPN client in the configuration. To configure the location of the CiscoAnyConnectSSLVPN client software, click Add to identify the location of the image and open the Add AnyCormcet Client Image