ccna certificate not yet received

ccna certificate not yet received.match any: classmap matches all traffic.match access-list access-list-name : class map matches the traffic specified by an extended access control list. Note: Unless otherwise specified, only one match command can be included in a classmap.Default Global PolicyThe class map configuration also includes a default layer 3/4 class map, and the ASA uses it as the default global policy. This default policy is called inspection defaulto for example: class-map inspectiondefault match default-inspection-trafficmatch default-inspectlon-traffic is a special CLI shortcut that matches the default port for all inspections. When used in a policy map, this class map ensures that the correct inspection is applied for each packet, based on the port of the day of the traffic. For example, when a UDP flow with port number 69 arrives at the ASA, the ASA enables TFTP checking. Only in this case can multiple checks be configured for the same class map. Normally, the ASA does not use the port number to determine which check to apply. This provides flexibility for applying checks to non-standard ports.To display relevant information about the class map configuration, use the show running-configclassmap command. To clear all class maps, use the clear configure class-map command in global configuration mode.9.2.9.3 Configuring the policy map and service policyConfiguring policymappolicymap is used to bind classmap and action (action) o In order to apply actions to Layer 3 and Layer 4 traffic, use the global configuration command policy-map policy-map-nameQ The policymap name must be unique and up to 40 characters long. This name should also be9.2 ASA Firewall Configuration 283