ccna boot camp cost

ccna boot camp cost.Routing.Properties.Logging.The options listed in the navigation panel will vary, depending on the view and the tab selected.9.2.3.4 Configuring Management Settings in ASDMThe ASDM configuration view is required to configure basic device management settings via the Device Installation tab. The settings that can be configured include system time, hostname, password, interface settings, and routing. Click the Apply button to save the changes made. The Device Installation tab also features a Startup Wizard, which is similar to the interactive Setup Initial Wizard. The startup wizard will take the administrator through the creation of a basic configuration of the ASA. Any previously configured values will be used as the current values.To configure the host name, domain name, enable, and Telnet password, select Configuration > Device Setup > Device Name/Password0 The host name appears at the command line prompt and can also be used in system messages. The ASA uses the additional domain name as a suffix for the unlimited name (unqualified name). Telnet password sets the login password. the default setting is "cisco". the Telnet password is used for Telnet and SSH access.As an option, you can create a master password to encrypt all passwords. To do so. select Configuration > Device Management > Advanced > Master Passphrase.To change the system time' select Configuration > Device Setup > System Time > Clocko In this DYNAMIC screen, the time zone, date and time can be configured manually. The date and time can also be configured dynamically using an NTP server. The time is displayed in the status bar in the lower right corner. To configure Layer 3 interfaces, select Configuration > Device Setup > Interfaceso In this window, you can createor edit ASA internal and external interfaces. To configure Layer 2 ports, select Configuration > Device Setup > Interfaces > Switch Portso In this window, you can enable Layer 2 ports and associate them to the specified VLAN interfaces. To configure default routes, select Configuration > DeviceSetup > Routing > StaticRouteso In this window, you can enter or edit static routes and default static routes.