A. ip route 209.165.201.0 255.255.255.224 209.165.202.130
B. ip route 0.0.0.0 0.0.0.0 209.165.200.224
C. ip route 209.165.200.224 255.255.255.224 209.165.202.129 254
D. ip route 0.0.0.0 0.0.0.0 209.165.202.131
Correct Answer: C
ccna 7.0 exam.Step 2 Use switchport port-security to enable port security on the interface. -Once enabled, you can configure other port security details. The full syntax of the switchport port-security command contains a number of optional parameters. Switch(config-if)# switchport port-security [mac-addressmac-address [vlan {vlan-id I{access|voice}}]] | [mac-address sticky [mac-address \ vlan {vlan-id | {access |voice}}]] [maximum value [vlan {vlan-list \ (access | voice})]]Note: The available configuration parameters depend on the switch model and IOS version. Step 3 (Optional) Set the maximum number of secure MAC addresses for the interface. Switch(config -if)# switchport port-security maximum value The range is 1 to 132. the default value is 1o6.3.1.3 Advanced Port Security ConfigurationAfter port security is enabled, it is necessary to create violation rules for the access port. A violation rule is the action that the switch should take if a security violation occurs. The port can be configured for one of three security violation modes, and the action to be taken in the event of a violation is established. The security violation modes that can be configured on a port are shown below.protect: When the number of secure MAC addresses reaches the maximum number allowed for the port, packets with unknown source addresses are dropped unless a large number of secure MAC addresses are removed or the maximum number of secure addresses allowed is increased. In this mode, there will be no notification when a security violation occurs.Restrict: When the number of secure MAC addresses reaches the maximum number allowed on the port, packets with unknown source addresses will be dropped unless a large number of secure MAC addresses are removed or the maximum number of secure addresses allowed is increased. In this mode, there will be a notification when a security violation occurs.In this violation mode (which is also the default mode), a port security violation will cause the port to immediately enter the error-disable state and turn off the port LED. the violation counter will also increase. The only way to get out of the error-disable state when a secure port is in it is to enter the shutdown and noshutdown interface configuration mode commands.The following procedure describes how to configure Korban port security options on an access port. Step 1 Set the violation mode. This is the action that the switch will take when a security violation is detected. If no violation mode is specified, the default6.3 Configuring Layer 2 Security 163acknowledges that the port is closed.
A. ip route 209.165.201.0 255.255.255.224 209.165.202.130
B. ip route 0.0.0.0 0.0.0.0 209.165.200.224
C. ip route 209.165.200.224 255.255.255.224 209.165.202.129 254
D. ip route 0.0.0.0 0.0.0.0 209.165.202.131
Correct Answer: C
A. to analyze traffic and drop unauthorized traffic from the Internet
B. to transmit wireless traffic between hosts
C. to pass traffic between different networks
D. forward traffic within the same broadcast domain
Correct Answer: C
A. switchport mode trunk
B. switchport mode dynamic desirable
C. switchport mode dynamic auto
D. switchport nonegotiate
Correct Answer: B
A. transfers a backup configuration file from a server to a switch using a username and password
B. transfers files between file systems on a router
C. transfers a configuration files from a server to a router on a congested link
D. transfers IOS images from a server to a router for firmware upgrades
Correct Answer: D
A. different nonoverlapping channels
B. different overlapping channels
C. one overlapping channel
D. one nonoverlapping channel
Correct Answer: D
Exam Code: 200-301
Exam Duration: 120 minutes
Exam Topics:
Latest Update: 11.19,2024
For office workers or college students, TOPONEDUMPS CCNA 200-301 dumps are all selected by professional instructors which cover significant and fundamental exam questions to save you precious time to study. All you need to do is to make a plan according to CCNA 200-301 dumps we provide at your convenient time.
Besides, with 100% real of CCNA 200-301 practical testing, you can access a remote server for simulated exams to well master the knowledge of the CCNA 200-301 test.
What's more, with private tutoring and customer service, TOPONEDUMPS employees will help you with all kinds of difficulties, challenge questions during CCNA 200-301 dumps you study as well as tips on how to pass the CCNA effortlessly.
To possess the CCNA Certificate and higher salary with TOPONEDUMPS assistance.
With 100% correct and valid exam questions and corresponding answers, TOPONDUMPS will help you know all the exam structure and how to answer correctly. Pass the CCNA 200-301 Exam in a short time of preparation for exams with our assistance.
Always providing you with the latest updating dumps of the CCNA 200-301 Exam. No need to spend much time googling questions and answers on the internet.
The professional customer consultancy service team is 24/7 online and offering you the latest news and tips on how to study and prepare for the CCNA 200-301 Exam.
Payment
Deliver Dumps
30day Free Update
Training,Pass Exam
We provide stable and high-quality real exam dumps, you only need to remember the contents of the dumps will be able to easily pass CCNA 200-301 Exam
We will follow the latest exam trends. Once the exam content changes, we will immediately update dumps to ensure stability and send them to your email.
We will update the free charge of the latest material for you as soon as possible after the change. Your service time will start from our stable date again.
When you complete the bill. We will send you the dumps information via email.
We accept multiple payment methods. Most customers use online payment with PayPal or Western Union. PayPal and Western Union are both very secure payment methods.